It will have happened at least once in your life to buy a new car and to find superficial and deep scratches along the bodywork. There is nothing more disappointing and at times devastating than this.
The car body, always appears solid and resistant, but at the same time it is very delicate, so it takes very little to ruin the paint, with abrasions and scratches that ruin the aesthetics.
To eliminate them altogether and make sure that the car is as good as new, you have to spend important amounts. Not everyone knows, however, that there are methods that allow you to remove all scratches on the car body in a few minutes by spending only 3 euros.
Surface scratch removal
Due to a carelessness, a small accident, of a wrong maneuver of other motorists and road users, damage to the car body can be reported, which seems irreparable but which is not. The only thing that needs to be done is to go in search of the best method to intervene and remedy.
They can usually be eliminated both superficial and deep scratches. For the former it takes less time and for the latter a lot more. The first thing to do is to proceed with washing the machine, this goes to highlight the scratches and eliminate the dirt. Then you can use the specific products indicated for the problem.
If it is a superficial scratch, just use the abrasive paste which costs only 3 euros. Fingertips are used to spread the abrasive paste over the scratch, rapid and careful circular movements are made until the scratch is totally gone. Then it goes over a microfiber cloth that removes the residues left.
Finally, there is the Polish auto that brings together polishing wax and abrasive paste. It is applied with a cotton swab directly on the affected part evenly. Finally, the polishing polish is passed to complete the operation. The car will be like new, spending very few euros. There are also those who try to remove scratches using toothpaste, in reality you should know that this only aggravates the damage.
Deep scratches, how to remove them
For a deep scratch, you cannot use the abrasive paste as explained above, because it takes much longer to obtain an acceptable result. In cases like this, however, it is advisable to consult a specialist.
You can try to sand the damaged part, but then you have to pass over the scratch the same paint present on the rest of the machine which has a considerable cost. Here you are because it is recommended to take the car to a body shop who will certainly know how and what to do.
